Rockwood Pistol Grip Needle Scaler

Removes rust, scale and built up grime.

Eastwood Rockwood Pistol Grip Needle Scaler - EW31819

The Rockwood Pistol Grip Needle Scaler works fast on heavy rust, scale and caked-on grime removal from most heavy-duty steel and cast iron frames and components.

▶   Variable Speed Control
▶   4,500 Blows per minute
▶   4 CFM [113 L/min] @90 PSI. [6.3bar]

It has A hard-hitting, 1-11/16" [43mm] stroke with 6" [150mm] Chisel Fingers for maximum effectiveness. Speed is easily controlled with an infinitely progressive, rotating knob control.

▶   (1) Pistol Grip Needle Scaler Tool
▶   (1) Chisel Finger Assembly
▶   (1) 3mm Hex Key
▶   (1) 1/4" MNPT, Male Quick Disconnect Inlet Fitting


Blows Per Minute: 4,500 BPM
Stroke: 1-11/16" [43mm]
Air Consumption: 4 CFM [113 L/min] @90 PSI. [6.3bar]
Inlet Thread Size: 1/4" FNPT

PRODUCT Instruction
msds Click here for product instructions

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.


Thoroughly read and understand these product instructions before using this tool. Failure to follow all warnings can result in tool damage or serious physical injury.

Eastwood Rockwood Pistol Grip Needle Scaler

Remove Heavy Rust & Scaling - Perfect for Frames & Heavy Equipment - Rockwood Needle Scaler

The needle scaler is great for removing heavy rust and scaling like you would find on old frames. It would also be great for remove scaling or corrosion from heavy equipment.

  • Most excellent tool!I bought this tool recently. All I have to say is it is amazing. I used it to remove old rubberized coating in the front fenders of my 67 Valiant. 40 mins worth of work and it was done. I am using a 25 gallon craftsman compressor so I had to stop to let it catch up but not often.
    Eastwood Rockwood Pistol Grip Needle Scaler