Eastwood Clear Coat Paints - Diamond Clear Satin
Eastwood Diamond Clear Satin for Painted Surface Aerosol 312grams
Eastwood Diamond Clear Satin for Painted Surface Aerosol 312grams - EW10197z
Aerosol formulation for the use on bare metal and painted surfaces.
▶ Seals and protects surfaces
▶ Compatible with all metals and coatings
▶ Heat resistant up to 300 degrees F
Use over finished or polished surfaces to protect from corrosion and ultra-violet light.
The ideal top coat to protect and preserve bare metal and painted surfaces. Available in high gloss and satin finishes, your parts will have the look and durability you want. Withstands temperatures up to 300℉. Compatible with all popular top coats.
This clear works well over thoroughly cured lacquer, enamel
and unusual finishes like our trunk paints.
Dries to the touch in 5-10 minutes at 50% humidity 77℉.
Fully cured in 48 hours at 77℉ at 50% humidity. 90+% Gloss.
Can be recoated at any time at 77℉ or warmer, 50% or less humidity.
Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free.
Pencil hardness after 48 hour cure @77℉ is 6H to 8H.
Always wear eye, skin and respiratory protection use in a well ventilated area consult MSDS for specific warnings and precautions
|Click for Material Safety Data Sheet|
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.
How to Remove and Treat Rust DIY from Eastwood