Wurth Stone Chip and Corrosion Protection Aqua - Black 1 Litre
For repair and restoration of the original structure and for protection against stone chips and corrosion in all visible areas, e. g. front and rear valances, side skirts, etc. Highly suitable as anti-drone mass for the interior, e.g. doors and boot.
VOC-Reduced, Waterbased and overpaintable, Solvent free resin-based coating compound that can be painted over. Bitumen free.
Suitable for repairing and recreating the original structure and for protecting against stone chip damage and corrosions on all visible areas such as e.g. front and rear aprons, side skirts, etc.
Suitable as a vibration-dumping compound for the interior such as e.g. doors, floor, firewall.
When painting over, environmental influences are to be observed. Do not spray on joints, engines, transmissions and brake systems. Protect from frost. Depending on the desired layer thickness, thinning with water (max. 2%) is possible.
Share this product with Friends
Shake can well before using. The application surface must be dry and rust-, dirt- and grease-free. All coating mass should be removed. Can be painted over with all paint systems after approx. 12 hours (depending on layer thickness), especially waterbased paints.
The best spraying results are achieved at a processing temperature of 15 - 25°C. The optimum spraying distance is 30 cm.
The 1,000 ml container unit can be used with the spray pistol (Art. No. 0891 106 3 or 0891 110).
Working pressure: 3 - 6 bar.
To view and print these files you will need Acrobat Reader
|Wurth Stone Chip and Corrosion Protection Aqua Material Safety Data Sheet|
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.