Hammerite - Direct to Galvanised Metal Paint
Hammerite Direct to Galvanised Metal Paint 750mls
Hammerite Direct to Galvanised Metal Paint
Hammerite Direct to Galvanised Metal Paint is specially formulated for application straight onto non-rusting metal, such as galvanised steel, aluminum, copper and brass, as a primer and topcoat in one.
Can be applied direct to galvanised surfaces with no need for a primer.
Only one coat required. Easy to use.
Low odour.
Long lasting protection.
Available in 750ml
▶ Can be applied
direct to galvanised surfaces with no need for a primer.
▶ Only one coat
required.
▶ Easy to use.
▶ Low odour.
▶ Long lasting
protection.
Galvanised Colours
Black
White
Silver
Copper
Dark Green
Blue
Colour accuracy
We've made every
effort to make the colours on screen as close as
possible to the ones you'll use. Unfortunately, we
cannot guarantee an exact colour match. Photographs
and paint chip colour will vary depending on your
screen settings and resolution. If you are unsure of
a colour, we recommend that you see our colour card
in your local store.
Usage
Direct to Galvanised can be used for:
▶ Direct to Galvanised
▶ Fence
▶ Garage door
▶ Garden furniture
▶ Metal Door
▶ Metal gate
Colourful Accessories
Colourful Accessorie
Colourful Corner
Wood and Metal
Wood and Metal
Garden Delights
Garden Delights
Garden Delights
Bench Restoration
Bench Restoration
Freshen up railings
Freshen up railings
Preparation
Preparation
1. Abrade Aluminium, Copper and Brass to improve adhesion.
2. On aged, dull galvanised surfaces spot prime any corroded or oxidised areas where the galvanise has broken down with Hammerite No1 Rustbeater.
3. On new, bright, galvanised surfaces, leave to weather for a number of months until duller and coarser before application of Hammerite Direct to Galvanised Metal Paint.
4. For maximum protection and a longer lasting finish, apply 1 coat of Hammerite Special Metals Primer first.
5. Where the surface has been previously painted, it is recommended that a small test area is applied. Leave for 1 hour. If there is a reaction remove all paint before applying Hammerite Direct to Galvanised Metal Paint.
Application
Applications
Please refer to back of pack for specific application instructions
Cleaning and Storage
After use, remove as much paint as possible from brushes before cleaning with Hammerite brush Cleaner & Thinners. Do not use or store in extremes of temperature
| PRODUCT INFORMATION | |
|---|---|
 |
Direct to Galvanised Metal Paint Material Safety Data Sheet |
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.