Eastwood Powder Coat - Atomic Pink
Powder Coat Atomic Pink- 1 LB bag
Eastwood Powder Coat - Atomic Pink - EW16046
Do The Job Right with Eastwood Powders!
▶ Cure Time: 20 Minutes @ 400℉ (actual surface temperature)
▶ 100% Virgin Powder
▶ Gloss Level: High - 85% to 90% at 60 Degrees
▶ owder Type: Polyester TGIC
▶ <80℉, well ventilated, <60% humidity
▶ Durable enough for under hood applications and heat resistant up to 250℉
This durable translucent top coat acts as a colored tint for your base powder or bare substrate. Apply alone as a single stage, over chrome powder to create brilliant pink chrome, or over any other metallic or textured base powder for a dramatic candy finish! When applied over a bright white powder, Atomic Pink will appear as a bright fluorescent pink.
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Gloss Level: 85 to 90 at 60 Degrees
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: High Gloss
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Powder Coating Colour Range
Silver Argent Rally Wheel Paint from Eastwood
This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.
Wet powder coating method for cast bullets
This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.