Chassis - Eastwood Extreme Chassis Black Satin Finish
Eastwood Extreme Chassis Black Satin Finish - 946ml
Eastwood Extreme Chassis Black Satin Finish - 946ml - EW11176ZP
Extreme Chassis Black has 3X the resins of traditional coatings, so it's tough enough for any undercarriage component...choose satin or high-gloss.
▶ Improved resistance against corrosion, chips and scratches
▶ Matches OEM finish
▶ Apply multiple coats without lifting
▶ Choose 14-oz. aerosol (about 8 sq. ft. of coverage) or quart can (up to 40 sq. ft. of coverage)
▶ Choose satin (25-35% gloss) or high-gloss (85% gloss) finish
You've spent many hours prepping your frame and suspension parts; now top-coat it with a tough, OEM-matching formula that provides extreme durability! 3 times more resins make it 3 times more durable than our original Chassis Black.
Note: This paint can not be applied over top of self-etching primers
3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches.
For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; quart can 11194ZP; or gallon can 11195ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.
Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings
|Click for Material Safety Data Sheet|
The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.
How to Remove and Treat Rust DIY from Eastwood