Loading...

Eastwood HotCoat Powder - Neon Green

The Rust Restoration Specialists !

Eastwood Hotcoat Powder Neon Green

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Size: 1 lb Bag

Product Code: EW16054LB

Quantity
Temporarily out of Stock.
email me when back in stock

Request Email when back in stock

Thank You for your interest in this product. It's imported and unfortunately is currently out of stock.
For us to let you know when it is back in stock, please complete the form below.
Please also add me to your mailing list for up-coming PPC Co. special

All the fields are required

Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.


ppcco tabs

Eastwood Hotcoat Powder Neon Green - EW16054LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Finish: High Gloss
Gloss Level: 80 to 90 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400℉ (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical