Eastwood Powder Coat Translucent Grape

A deep glossy candy grape finish when applied over chrome, polished or chrome powdered parts.

Eastwood Powder Coat Translucent Grape - EW10154LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Translucent Grape
Gloss Level: Gloss
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Silver Argent Rally Wheel Paint from Eastwood

This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.

Wet powder coating method for cast bullets

This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.


  • Awesome color!!!
    I powder coated a paintball marker using this color. After taking it to the field for a test run my shop has been getting bombarded with jobs for more custom paintball marker work!! Great color and awesome price!!!
  • Great looking color
    I powder coated a paintball marker with this color and it added a great custom look!! Since then my shop has been getting tons of requests for powder coat jobs on markers!!
  • dark
    I shot this over Reflective Chrome and it looks great. Nice and shiny too. It is a bit too dark and looses some of the translucent effect unlike the translucent violet.
  • absolutely amazing!
    i painted a set of chrome valve covers with this color and it really pops! highly recommend if painting over chrome!

Write a Review

Product Feedback

1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *