Eastwood Hotcoat Powder Sea Foam Green
Sea Foam Green – EW 16052
Create a high gloss neon finish with Eastwood Sea Foam Green powder coat.
Do The Job Right with Eastwood Powders!
Provides extremely durable finish
Contains no environmentally harmful solvents
100% Virgin powder
Impact resistant and flexibility
Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Apply alone as a single stage, or as a base for any one of our translucent candy powders for a one-of-a-kind finish!
Color: Sea Foam Green
Gloss Level: High Gloss
Gloss Level: 80 to 95 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
RAL Color: 6028
Coverage: 1 pound of powder = approximately 20 square feet
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Share this product with Friends
Powder Coating Powder
Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood