Eastwood Powder Coat Gray

This Gray powder provides a smooth high gloss finish that looks great.
Contact us for Pricing.

Eastwood Powder Coat Gray - EW16248LB

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Gray
Gloss Level: Gloss 80+
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
RAL Number: 7012
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Silver Argent Rally Wheel Paint from Eastwood

This Silver Argent Paint from Eastwood has the correct tone, sheen and appearance of many original wheels. Rally Wheel Silver is appropriate for styled steel wheels, especially Muscle-Era cars. High solids content; one can covers 6 sq. ft. or two to four wheels, depending on the application. Acrylic Lacquer formulation. 50-60% gloss. Max temp 250 degrees F.

Wet powder coating method for cast bullets

This is how I coat my lead cast bullets with powder coat. I never had much luck with the dry tumbling method so I tried and eventually came out with this. Many round down the barrel I decided to share it.





Write a Review

Product Feedback

1    2    3    4    5
Name *
Email *
Phone *
Product Name
Comment *