Eastwood HotCoat Powder - Translucent Blue
Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.
Eastwood Hotcoat Powder Translucent Blue - EW10089lb
Do The Job Right with Eastwood Powders!
▶ Provides extremely durable finish
▶ Contains no environmentally harmful solvents
▶ 100% Virgin powder
▶ Impact resistant and flexibility
▶ Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Note: split images - right side is over chrome, polished metal, Argent Silver Base Coat, or Reflective Chrome, left side is over bare metal, 10303 Rally Wheel Silver, and 51082 OEM Wheel Sparkle Silver.
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Color: Translucent Blue
Gloss Level: Full Gloss 90+%
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Urethane
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Select Powder Range to see
Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood
With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!
Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes