Eastwood HotCoat Powder - Black Stardust

The Rust Restoration Specialists !

Eastwood Hotcoat Powder Black Stardust

Extremely durable, chip-resistant finish; coat and cure in under an hour.

Size: 1 lb Bag

Product Code: EW10336lb

Quantity

Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.


ppcco tabs

Eastwood Hotcoat Powder Black Stardust - EW10336lb

Do The Job Right with Eastwood Powders!

▶   Provides extremely durable finish
▶   Contains no environmentally harmful solvents
▶   100% Virgin powder
▶   Impact resistant and flexibility
▶   Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250℉. They are suitable for any metal surface and most cure at a temperature of 400℉ at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11678.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Specification

Color: Black Stardust
Gloss Level: Gloss 80-90%
Cure Temperature: 400℉
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Other Colours

Select Powder Range to see

map
map

Powder Coating Made Easy - Dual Voltage Powder Coating Gun from Eastwood

With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical

  • The coolest powder Hotcoat sells!
    The pictures on the website do no justice for this powder at all!!! The effect is truly remarkable, and really sets whatever you coat apart from the rest.
    I used Black Stardust over Sinlge Stage Chrome and topped it off with Super Gloss Clear on the valve cover of my S14 SR20DET and I can't get people to look away from it. In the shade it's very subtle, almost a gloss black, but when it's in the light it takes on an entirely new persona.
  • WOW
    This was my first ever powder coating project. I didn't know what to expect and picked this color just for grins for a metal sculpture project. All I can say is WOW. The picture on the web site does not do this color justice. As soon as I opened the oven door people were coming up to check it out. It looks awesome. I am very happy and will definitely be buying more from Eastwood.
  • Awesome
    It looks black in low light or shade. In the right light it looks gold or blue or green depending on the angle. This stuff rocks