Hotcoat Powder Black Primer
Black Primer – EW 22419
Do The Job Right with Eastwood Powders!
Provides extremely durable finish
Contains no environmentally harmful solvents
100% Virgin powder
Impact resistant and flexibility
Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
This epoxy powder offers superior chemical resistance. Perfect for numerous under the hood or under the car parts. Avoid parts in direct sun light.
Priming with Powder - The legendary durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under High Temp Powders, or directly under translucent finishes.) For best results apply to clean bare metal and place in a preheated 400 degree F oven until flow out occurs. DO NOT cure beyond flow out as adhesion will be adversely affected. Remove from oven, cool, apply powder of choice and bake as normal.
Gloss Level: Flat
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Epoxy
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Share this product with Friends
Powder Coating Powder