Prevention - Eastwood Textured Rust Encapsulator Black Aerosol
Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.
Eastwood Textured Rust Encapsulator Black Aerosol 425gm - EW14741Z
Stop - and hide - rust in its tracks!
Our "Textured" Rust Encapsulator stops surface rust, and
hides it too!
Textured Rust Encapsulator is great for floor pans, frame
rails and rocker panels.
With the new textured finish you can hide spotty surface
rust by making the whole area a textured finish!.
UV resistant, compatible with most topcoats and epoxy
fortified for superior adhesion.
Simply paint over the top of rust and stop the spreading and
forming of new rust.
Temperature: 204℃ resistant.
Coverage: One aerosol can covers approximately 1 square
metres.
Application
Use a wire brush to remove loose rust, scale and paint,
and remove dust, grease and oil deposits. Feather
surrounding paint with 220-grit sandpaper. Shake can for at
least 2 minutes once the mixing ball starts to rattle. Hold
the Textured Rust Encapsulator can 10"-12" above surface as
you spray. A single coat dries to the touch in 20 minutes,
and is thoroughly dry in 3-4 hours at 68 degreesF. For
greater durability, a second coat can be applied 1 hour
after the first. Allow 6-8 hours after the last coat before
applying topcoat. Use over or under body fillers.
Safety
Work in a well-ventilated area when applying this
product. The use of a respirator is recommended. Shake
vigorously for 2 minutes before spraying. Consult MSDS for
specific safety warnings.