Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F.

Developed using the latest ceramic nano-technology integrated with silicone alkyds, this is the new standard in engine coatings.

Each color is replicated after the original color for that deep rich factory look.

The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat.

In fact this is the highest temperature range in the industry, 650 degrees F!

NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Part Number – EW-7775163zp

Share this product with Friends
Tweet

Application
To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun.
Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP.
No primer is necessary and allow 24 hours to fully cure
NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Safety
Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.

PRODUCT INFORMATION To view and print these files you will need Acrobat Reader
	Ceramic Engine Paint - Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION To view and print these files you will need Acrobat Reader
	"Universal Gloss Red" Ceramic Engine Paint - Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.