U-Pol P.40 Body Repair Kit for Holes - 4x25g Sachets

ISOPON P.40 Body Filler for Holes is the ideal choice for repairing and priming rust holes up to 75mm wide in most types of metal ready for painting.

U-Pol P.40 Body Repair Kit for Holes - 4x25g Sachets

P40 is a two component polyester fibre filler used for bridging of holes, gaps in steel, fibreglass and most plastics. It has many times the strength of regular fillers. Clean the area to be repaired, mix resin with hardener, apply so that it is not quite flush with surface. Ready to sand in 20 minutes. Finish off with P38, the polyester filler for a professional finish to be primed and painted. Pack includes resin, hardener and applicator. Comprehensive instructions are included.

This ISOPON Body Repair Kit for Holes contains everything you need to repair and prime rust holes in most types of metal. First fill the hole using P.40 Body Filler for Holes. It's easy to mix and can be used with aluminium mesh to bridge holes up to 75mm in diameter. Complete the repair with a layer of P.38 Multi-Purpose Body Filler which can be easily sanded and then primed with the Multi-Purpose Primer aerosol. This sprays on easily and dries fast leaving a smooth, even finish that's ready to paint. Just follow the simple instructions in this guide for a quick and easy repair.

Many of the Australian bogs won't work with POR-15, they just fall off. We strongly recommend the use of P38 and P40 for a correct lasting job.

U-POL Fillers have been tested to work with POR-15®. Many locally made fillers will not adhere to POR-15®

The contents of this kit are sufficient to repair approximately 4 holes up to 50mm in diameter.

U Pol P40 Body Filler is specifically designed for applications that require more strength, such as bridging holes, or filling high-stress areas. U Pol P40 Body Filler is loaded with tiny polyester fibres, which makes it many times stronger than ordinary body fillers. Use U Pol P40 with POR-15, to make permanent repairs to rust holes or deep pits in steel or galvanized steel. Then, use U Pol P38 body filler to finish off the repair for the ultimate smooth final finish.

How to Use

U-Pol P.40 Body Repair Kit for Holes
Application Hint: Apply 2 coats of POR-15® over the whole area, apply P40 and the P38 and give it all another coat of POR-15®. This way the metal and bog are both seal in.
PRODUCT INFORMATION
msds U-POL P.40 Body Filler Technical Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds U-POL P.40 Body Filler Instruction Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds U-POL P.40 Body Filler Material Safety Data Sheet
msds U-POL P.40 Body Filler Hardener Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

Youtube video example

Phasellus facilisis mauris vel velit molestie pellentesque. Donec rutrum, tortor ut elementum venenatis, purus magna bibendum nisl, ut accumsan ipsum erat eu sapien mauris vel velit molestie pellentesque.

View portfolio