Loading...

Rust Sealers - U-POL Raptor Ute Liner 2Litre Kit

The Rust Restoration Specialists !

U-POL Raptor Ute Liner 2 Litre Kit

U-POL'S Raptor liner can be used as a ute liner It can be used over a multitude of surfaces and RAPTOR tintable can be tinted to any colour of your choice.

Product Code: UPL.RLB.S2

Colour
Quantity

Add to Cart

Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.


ppcco tabs

U-POL Raptor Ute Liner 2 Litre Kit

RAPTOR is a super-tough, highly durable, UV-stable coating that is applied by spray gun, roller or brush. RAPTOR ensures protection against scratches, abrasions, rust, corrosion, damp and extreme temperatures.

RAPTOR is a product of U-POL, a world leader in automotive refinish products. Originally commencing business in 1948 as manufacturers of polyester bodyfiller for car repair, U-POL has expanded to produce paints, coatings and ancillary products for car body repair.
Supplied in BLACK and TINTABLE versions, RAPTOR may be matched to ANY COLOUR with the addition of automotive basecoat tinters
We recommend using the 4L Kit for most standard ute tubs.

▶   Can be applied with underbody schutz gun, paint roller, paint brush or spray gun - no spray booth required
▶   Helps deaden sound and vibrations; waterproof seal and is UV resistant
▶   Can be used as non-skid and slip-resistant coating (if anti-slip grit is added)
▶   Protects against rust, corrosion, damp, and extreme temperature
▶   Provides excellent UV protection
▶   Resistant against fuels, hydraulic oils, animal urine, salt water and more
▶   High coverage - up to 12 m(sq) per 4 litre kit

Use for automotive, construction, marine, recreational, industrial, agricultural and commercial applications.

Kit contents 2 x 750ml bottles of base and 2 x 250ml RAPTOR hardener.

Application Tips

Substrate Preparation:
▶   Do not apply to bare metal - must be applied over primer or existing 2-pack colour & scuffed
▶   Always clean, scuffed surface with wax & grease remover
▶   Do not apply over 1K primers or U-POL High #5 ... instead use a 2K urethane or epoxy primer, or etch primer such as U-POL Acid #8
▶   Observe curing times on etch primers
▶   Raptor is heat-curing and will re-flow uncured primer, allowing acid to bite into Raptor instead of the substrate
▶   Do not apply over exposed OEM seam sealer or uncoated aftermarket seam sealers
▶   Always coat with primer before applying Raptor. When in doubt use an adhesion promoter like U-POL Grip #4
▶   To achieve a clean tape line, spray U-POL Grip #4 along tape edges before Raptor
▶   To assure good adhesion, spray U-POL Grip #4 in areas that are difficult to scuff - under rails, between floor and side panels, etc.
▶   Remove brackets, bolts, hooks and tie-down points where possible and "plug" holes with rolled-up masking tape

Application:

▶   Thinner coats = harder surface ... thicker coats = softer surface, reduced texture
▶   Touch dry in <1 hour @ 20℃, light duty cure in 2-3 days @ 20℃ and full cure in 5-7 days @ 20oC
▶   One coat will give up to 300 microns film build - 1 litre will cover 2-3m2 (22-32 square feet)
▶   For higher build apply another coat after flash off period
▶   To achieve a flatter textured harder surface Raptor can be reduced up to 10%
▶   Raptor may be applied over itself after full cure for touch ups
▶   Add grit to Raptor before application to make it a high adhesion, extremely durable non-slip coating

Application Over Other Liners:

▶   As a general rule, if any existing liner looks similar to Raptor in hardness and texture, you can apply Raptor over it
▶   Do not apply Raptor over "franchise" bed liners like Rhino or other polyurethanes. Raptor over old epoxy bed liners is OK
▶   Note that aged epoxy tends to get brittle and crack; we recommend grinding it down so that the substrate starts to show through before applying Raptor
▶   Thoroughly scuff existing bed liner and wipe down with wax & grease remover
▶   If you can still see existing bed liner texture, it is not scuffed sufficiently

PRODUCT INFORMATION
msds Raptor Tintable Truck Bed Liner Product Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds Raptor Black Truck Bed Liner Product Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

Raptor Promo Video


U-POL® RAPTOR® Liner & Protective Coating: Part 1 How to Mix and Apply RAPTOR®


RAPTOR® How to Tint and Spray