Bilt Hamber Dynax-UC | For High Protection Rust Proofing

High quality anti-corrosion wax which provides exceptionally long-lasting protection to your vehicle. Especially to the cars underseal and body panels.

Bilt Hamber Dynax-UC | For High Protection Rust Proofing

dynax UC - the new way to protect your car in seconds...

dynax UC new high-performance anti-corrosion wax provides a low film thickness see-through protective shield. It's firm wax like film is rich in unique metal seeking corrosion inhibitors that stop existing and prevent new corrosion. dynax UC can be applied to bare metal or painted surfaces in fact anywhere where a discrete and powerful inhibitor is needed. dynax UC is completely safe to use on the vast majority of paint coatings and is ideal where dark coloured waxes or under seal would detract from the painted finish of vehicle bodywork or underside.

The touch dry tough wax film provides mechanical protection to the protected surface too. dynax UC is the ideal product to provide high levels of protection during the winter months - use on lower body panels, chassis, floors, sills, jacking points, chrome, suspension, fixings, wheel arch lips, alloy wheels - plus it's perfect for protecting motorcycles, alloys, aluminum, boats, mowers, machinery, tools and equipment too! dynax UC can be easily removed if required with simple solvent wipes or alkaline degreasers after the aggressive winter months pass or left in place for prolonged protection.

The giant 750ml aerosols are equipped with a unique valve and cans charged to 70 psi they work on their side and even upside down. Long term protection in seconds.


▶   Transparent film
▶   Giant 750ml aerosol
▶   Can be sprayed upside down
▶   Supplied with application straw for difficult to reach areas
▶   Contains multi-metal corrosion inhibitors

How to Use

The corrosion inhibitors in dynax UC are able to protect clean and corroded steel alike, however this is a low film thickness material and where possible surfaces should be cleaned. Under bodies will benefit from stream cleaning or power washing, using our surfex HD degreaser / all purpose cleaner will provide great results, the surface should be well rinsed with plenty of clean water and then dried, for best results the surfaces should be wiped over with white spirit or similar.

Apply dynax UC in fine coats, film thickness should be built in this way rather than a single heavy coat. At around 50 microns dft (dry film thickness) dynax UC remains virtually transparent. The product will cure to its final firmness after 24 - 96 hours, although the vehicle can be used after just 30 minutes if required. The dry film is as firm as candle wax and once fully cured will resist dirt pick-up when compared to other wax protection film.

If required the film can be removed after winter or before shows with suitable degreaser such a Surfex HD (used hot) or simple solvent wiping.

How To Protect Alloy Wheels From Corrosion by Bilt Hamber [Dynax UC]

Bilt-Hamber dynax UC -- the new way to protect your car in seconds providing a high quality transparent protective shield of film.
dynax UC can be applied to bare metal or painted surfaces in fact anywhere where a discrete and powerful inhibitor is needed. dynax UC is completely safe to use on the vast majority of paint coatings and is ideal where dark coloured waxes or under seal would detract from the painted finish of vehicle bodywork or underside.
The touch dry tough wax film provides mechanical protection to the protected surface too. Bilt Hamber dynax UC is the ideal product to provide high levels of protection during the winter months -- use on lower body panels, chassis, floors, sills, jacking points, chrome, suspension, fixings, wheel arch lips, alloy wheels -- plus it's perfect for protecting motorcycles, alloys, aluminum, boats, mowers, machinery, tools and equipment too! dynax UC can be easily removed if required with simple solvent wipes or alkaline degreasers after the aggressive winter months pass or left in place for prolonged protection.


  • Dynax UC on a MX5 Mk4
    I used this in the engine compartment and it was easy to apply, good stuff.
  • A superb product that does dry clear.
    I've been looking for a product that offers protection and is clear for some time.
    My idea is to provide protection to a car underside, which is kept clean, but has had suspension components replaced or powder-coated. I didn't want to detract from it's look and the effort that has been put into the car.
    As with most coatings, preparation is key. All relevant trim (side skirts, arch lines etc) was removed, then the underside of the car was thoroughly rinsed, washed, scrubbed and degreased several times. The car was left to dry for a week in a heated garage.
    Application was fairly easy with the aerosols, which provided good coverage, good pressure and a good quality spray head.
    The coating leaves a fairly clear finish, its only moderately duller.
    Time will tell regarding the durability.
  • DYNAX UC on a sierra cosworth
    Used this in aerosol form under the bonnet and around engine bay of my sierra cosworth . Created near factory results , went on superbly and created a protective long lasting clear coat .