Loading...

TopCoats - U-POL Weld Thru Primer

The Rust Restoration Specialists !

U-POL 0789 #2 Weld Thru Zinc Rich Primer - 450ml Aerosol

U-Pol Weld #2 - Weld Through Primers are special types of products that have high adhesion and superior conductivity to help protect welding applications like SPOT, MIG, and TIG from corrosion.

Product Code: UPOL0789

Quantity

Add to Cart

Check out our Product Guide for Common Uses for PPC CO. Products on restoration projects.


ppcco tabs

U-POL 0789 #2 Weld Thru Zinc Rich Primer - 450ml Aerosol

The U-Pol 0789 #2 Weld Thru Zinc Rich Primer is a fast drying, zinc rich, weldable primer that has excellent conductivity and excellent adhesion on metal surfaces. This weld thru primer can be used with Spot, Tig, or Mig welders.

The U-Pol 0789 Weld Thru Primer is offered in a ready to use convenient aerosol can.

Key Features of the U-Pol Weld #2 - Weld Through Primers:
▶   High adhesion to metals and super conductivity
▶   Superior rust protection for SPOT, MIG, and TIG welding applications
▶   Dry film contains a very high concentration of either zinc or copper
▶   Fast-drying formula helps enhance the welding process
▶   Product will work on both zinc and copper, but mostly for copper

The 450ml size is roughly equivalent to an 16 oz aerosol spraycan.
▶   High concentration of zinc or copper in the dry film
▶   Superior conductivity
▶   Clog free nozzle
▶   Fast drying - speeds up the welding process

The U-Pol Weld Thru Zinc Rich Primer is a very high quality weld thru coating to be used before you weld. This Weld Thru Coating is very economical and is not susceptible to clogging up as other brands do. This allows you to use all the product in the can. When you're not throwing away a can half full that saves you money!

Instructions for Using U-Pol Weld Thru:
▶   Sand area to be welded with P180-P240 sand paper.
▶   Using a good quality grease and wax remover degrease the area to be coated.
▶   Shake the U-Pol, 0789 Weld Thru Zinc Rich Primer for 2 minutes prior to spraying.
▶   At approximately 10" from the panel, spray 1-2 coats allowing allowing 20 minute flash time between coats.

PRODUCT INFORMATION
msds Technical Information Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

PRODUCT INFORMATION
msds Material Safety Data Sheet

The information contained herein is based on data considered accurate and reliable to the best of our knowledge and belief as of the date compiled. However no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use hereof.

  • Good adhesion, fast drying, and did not burn away at weld sites. So far, very pleased with this product.